| Taking Photos |
|
 |
Mode Dial
- Turn the mode dial to the desired setting.
- Auto Flash
- Forced Flash
- No Flash
- Timer
|
|
 |
Lens Wheel
- Gently rotate the lens wheel to the desired setting.
- Normal
- Panoramic
- Stereo
|
|
 |
Aim
- Look through the viewfinder to make sure that the camera is aimed at the scene you want to capture.
- Make sure your hands or fingers do not block the camera lens.
|
|
 |
Shoot
- Press the Shoot button.
- You will hear an initial beep followed by another.
- Additionally, a red LED will glow in the viewfinder between the two beeps. Hold the camera steady during this period to avoid motion blur.
|
|
Note: If the camera is set in the Timer mode, it will wait for 10 seconds before taking the picture.
During this time, the buzzer will beep and the Timer LED will flicker.
|
|
 |
Memory Level LED blinking GREEN:
- Picture was captured and successfully saved.
|
|
 |
Power Level LED blinking RED:
- Insufficient power to take a picture.
- Recharge the supercap by either rotating the hand crank or replacing the battery.
|
|
 |
Memory Level LED on RED:
- Insufficient memory to save the captured picture.
- Try deleting one or more photos from the memory or downloading the photos to a computer.
|
|
 |
Memory Level LED blinking RED:
- Camera is low on memory.
- The camera can take less than 5 pictures. You should consider downloading the photos to a computer or deleting one or more photos from the memory.
|
